HP DesignJet T100/T120/T520/T730/T830 OEM Hybrid Cutter Kit With Clutch – CQ890-67108
Restore clean, dependable roll-media cutting.
The HP CQ890-67108 cutter-with-clutch assembly replaces a worn, damaged, stuck, or nonfunctioning cutter mechanism in compatible HP DesignJet printers.
The right assembly for reliable finishing.
Designed to cut roll media after printing so completed output can separate cleanly and consistently.
A genuine HP service assembly engineered for the compatible DesignJet cutter path and engagement system.
A practical replacement when the installed cutter is worn, damaged, stuck, noisy, or no longer completing cuts.
HP publishes a cutter-replacement procedure for the supported printer families. Follow the procedure for the exact printer model.
The table below consolidates HP-published product numbers for the legacy families in the title and additional platforms on HP's current CQ890-67108 compatibility list. Regional configurations, rugged-case bundles, and early hardware revisions can use different service references. Confirm CQ890-67108 against the printer label or serial-specific parts lookup before purchase.
Compatible HP DesignJet models & product numbers
| Printer family | Compatible model | HP product number(s) |
|---|---|---|
| DesignJet T100 series | T100 24-in Printer | 5ZY56A |
| DesignJet T100 series | T125 24-in Printer | 5ZY57A |
| DesignJet T100 series | T130 24-in Printer | 5ZY58A |
| DesignJet T500 series | T525 24-in Printer | 5ZY59A |
| DesignJet T500 series | T530 24-in Printer | 5ZY60A, 5ZY60B |
| DesignJet T500 series | T525 36-in Printer | 5ZY61A |
| DesignJet T500 series | T530 36-in Printer | 5ZY62A, 5ZY62B |
| DesignJet T120 | T120 24-in Printer / ePrinter / 2018 edition | CQ891A, CQ891B, CQ891C, CQ891AR |
| DesignJet T520 | T520 24-in Printer / ePrinter / 2018 edition | CQ890A, CQ890B, CQ890C, CQ890D, CQ890E, CQ890AR |
| DesignJet T520 | T520 36-in Printer / ePrinter / 2018 edition | CQ893A, CQ893B, CQ893C, CQ893E, CQ893AR |
| DesignJet T730 | T730 36-in Printer, including select rugged configurations | F9A29A, F9A29B, F9A29C, F9A29D, F9A29E, F9A29G, F9A29AR, T5D66A |
| DesignJet T830 | T830 24-in Multifunction Printer | F9A28A, F9A28B, F9A28D, F9A28E, F9A28L, F9A28AR |
| DesignJet T830 | T830 36-in Multifunction Printer, including select case bundles | F9A30A, F9A30B, F9A30C, F9A30D, F9A30E, F9A30G, F9A30M, F9A30AR, 1JL02A, 1JL02B, T5D67A |
| DesignJet T200 series | T210 24-in Printer | 8AG32A, 8AG32H |
| DesignJet T200 series | T230 24-in Printer | 5HB07A, 5HB07H |
| DesignJet T200 series | T250 24-in Printer | 5HB06A, 5HB06H, 5HB06M |
| DesignJet T600 series | T630 24-in / 36-in Printer | 5HB09A, 5HB11A |
| DesignJet T600 series | T650 24-in / 36-in Printer, including select GSA variants | 5HB08A, 5HB08G, 5HB08H, 5HB10A, 5HB10H, 5HB10M |
| DesignJet Studio | Studio 24-in Printer (Wood / Steel variants) | 5HB08B, 5HB12A, 5HB12B, 5HB12C, 5HB12D, 5HB12H |
| DesignJet Studio | Studio 36-in Printer (Wood / Steel variants) | 5HB14A, 5HB14C, 5HB14H |
| DesignJet Spark | Spark 24-in Pro Printer | 5HB09A* |
| DesignJet Spark | Spark 24-in e-Entry Printer | 5HB07A* |
| DesignJet T850 | T850 36-in Printer | 2Y9H0A |
| DesignJet T850 | T850 36-in Multifunction Printer | 2Y9H2A, 2Y9H2F, 2Y9H2M |
| DesignJet T870 | T870 24-in Printer | AM0X9A, AM0X9H, AM0X9M |
| DesignJet XT870 | XT870 24-in Printer | AM0X9F |
| DesignJet T950 | T950 36-in Printer | 2Y9H1A, 2Y9H1G |
| DesignJet T950 | T950 36-in Multifunction Printer | 2Y9H3A, 2Y9H3G |
| DesignJet XT950 | XT950 36-in Printer | 2Y9H1F, 2Y9H1J |
| DesignJet XT950 | XT950 36-in Multifunction Printer | 2Y9H3F, 2Y9H3J |
| DesignJet Smart Tank | Smart Tank T858 36-in Printer | 2Y9H4A |
| DesignJet Smart Tank | Smart Tank T908 36-in Multifunction Printer | 2Y9H6A |
| DesignJet Smart Tank | Smart Tank T918 36-in Multifunction Printer | 2Y9H7A |
Base product numbers are shown without market/order suffixes such as #B1K. *The Spark numbers are service-channel catalog mappings for HP's current Spark compatibility names; verify the printer label. HP may issue additional regional, warranty-bundle, or remanufactured SKUs, so always use the product number on the printer label for the final match.
Part numbers & cross references
| Reference type | Part number(s) |
|---|---|
| Primary HP service kit | CQ890-67108 |
| HP legacy-lookup replacement references | CQ890-67017, CQ890-67066, CQ890-67090, CQ890-67091 |
| Common alternate / assembly references | CQ890-60238, CQ890-40339, 2Y9H0-60167 |
HP's legacy parts lookup points all four replacement references to CQ890-67108; however, CQ890-67090 and CQ890-67091 originally had different kit contents and revision-specific uses. The alternate/assembly references are commonly listed in parts catalogs but are not confirmed by HP as direct supersessions. Verify the printer product number and serial number before ordering.
HP identifies the kit contents as the cutter with clutch/body, cutter extrusion lead (cover), cutter bridge, and instruction flyer.
No other printer assemblies, supplies, accessories, or services are included unless expressly stated in the order summary.
Installation information
This is a technical replacement component intended for installation by an experienced printer technician. Switch off and disconnect the printer from power, then follow the applicable HP cutter-replacement instructions and safety procedures for the exact model. After installation, confirm free cutter movement and run the printer’s form-feed-and-cut function.
Confirm the printer product number and required service reference before ordering. This listing is for the cutter service kit only, not a complete printer. Warranty coverage applies only when expressly stated in the product listing, Order Summary, invoice, or other written purchase documentation.
HP and DesignJet are trademarks of HP Inc. Product numbers are provided for identification and compatibility guidance. Specifications and service references can vary by region, revision, and serial-number range.
Couldn't load pickup availability
Pickup available at WAREHOUSE
Usually ready in 5+ daysPairs well with
In stock! Ships within 5-7 business days.
100% Tested prior to shipment
Warranty Included (1 Year, 2 Year, and 3 Year Extensions available on all Printers)
Lifetime technical support
HP DesignJet T100/T120/T520/T730/T830 OEM Hybrid Cutter Kit With Clutch – CQ890-67108
Please visit our FAQs page or email Sales@theprinterdepo.com with any questions you may have.
-
Shipping Information
Most orders ship within 48 hours of receipt.
-
Customer Support
Please reach out to us via email or chat box Monday-Friday 8AM-5PM CST.
-
FAQ’s
Please click "Quick Links" at the bottom of the page & open "FAQ's" for more information.
-
Technical Support
All of our products include lifetime technical support via email.
FAQs
Please read our FAQs page to find out more.
How much is shipping?
- Shipping is free on all items below 65lbs
- If you are purchasing in bulk & the total weight exceeds 65lbs then please reach out to us through the chat box or email sales@theprinterdepo.com for a custom quote.
- If the item exceeds 65lbs then you may be subject to freight charges.
Do you charge sales tax?
- We do not collect sales tax outside of the state of Texas. Therefore, you do not need to provide any proof of exemption unless your shipping/billing address is in Texas.
- If you are located in Texas & would like your account to be tax exempt then you must email Sales@theprinterdepo.com your Texas resale certificate or proof of exemption.
Do you offer "Blind Drop Shipping"?
- Yes, we offer "Blind Drop Shipping" & "Private labeling".
- Please email Sales@theprinterdepo.com for more details.
Do you offer any discounts?
- Yes, please sign up for our weekly newsletter for upcoming sales, discount codes, and product announcements.
- Wholesalers should email sales@theprinterdepo.com for a custom quote.
Do you accept "Purchase Orders"?
- Yes, please send your PO's to sales@theprinterdepo.com
- Credit card or Net 30 application must be on file in order for your purchase order to be processed.