HP Color LaserJet M652 M653 M681 M682 E65050 E67650 E67660 Image Transfer Kit OEM P1B93A

HP Color LaserJet Enterprise & Managed

Original HP transfer technology.
A fresh supplies status.

OEM Image Transfer Belt • P1B93A Reference

Replace the intermediate transfer belt in your compatible HP Color LaserJet printer. This OEM belt resets the printer’s “Image Transfer Kit” status to 100% upon proper installation and recognition.

Please note: OEM transfer belt only.

This listing includes one OEM intermediate transfer belt assembly associated with the P1B93A Image Transfer Belt Kit.

The separate transfer roller, paper-feed rollers, pickup rollers, and retard/separation rollers supplied in HP’s complete kit are not included. P1B93A is provided as the kit compatibility reference.

An essential part of color printing.

The intermediate transfer belt, or ITB, carries toner images through the printer’s image-transfer process before they are fused onto the page. It plays an important role in producing text, graphics, photographs, and other printed content.

This OEM HP transfer belt provides a focused replacement when the ITB requires service. Compatibility includes the manufacturer-listed Enterprise and Managed models below, plus additional printer series confirmed by The Printer Depot.

Resets “Image Transfer Kit” status to 100%.

Once properly installed and recognized by a compatible printer, this belt will reset the “Image Transfer Kit” supplies status to 100%.

The percentage refers to the printer’s reported image-transfer maintenance status. It does not reset the printer’s total page count or indicate that other maintenance components have been replaced.

Additional compatibility confirmed by The Printer Depot.

In addition to the manufacturer-listed models above, The Printer Depot has confirmed that the OEM transfer belt supplied in this listing is compatible with the following HP Color LaserJet series:

• HP Color LaserJet Enterprise M553 Series
• HP Color LaserJet Enterprise M554 Series
• HP Color LaserJet Enterprise M555 Series
• HP Color LaserJet Enterprise MFP M577 Series
• HP Color LaserJet Enterprise MFP M578 Series
• HP Color LaserJet Managed E55040 Series
• HP Color LaserJet Managed MFP E57540 Series

These additional compatibility confirmations are provided by The Printer Depot and apply specifically to the OEM transfer belt offered in this listing. They are separate from HP’s published P1B93A kit compatibility list.

Match your printer before ordering. Review both the HP-listed compatibility tables and The Printer Depot’s additional series list above. The standard M681f and Flow M681f have different product numbers; both configurations shown in the table are compatible.

Install and verify.

1. Prepare the printer. Turn it off and disconnect power according to the model-specific ITB replacement instructions.
2. Protect the belt surface. Handle the assembly by its designated grips. Avoid touching, scratching, or placing objects on the belt.
3. Install the replacement. Remove shipping protection as directed and fully seat the belt according to the appropriate service procedure.
4. Allow initialization. Close the printer, reconnect power, and allow it to complete startup and any calibration.
5. Confirm the result. Check the supplies status for a 100% “Image Transfer Kit” reading and print a test page to verify output.

OEM belt. 100% transfer-kit status.

HP Color LaserJet Image Transfer Belt • P1B93A Reference

Transfer belt assembly only. Separate transfer and paper-feed rollers are not included.