HP LaserJet P2015 Base Model & P2015D Formatter Board Assembly Q7804-60001

HP LaserJet P2015 & P2015d Formatter Board

Restore your compatible HP LaserJet P2015-series printer with the Q7804-60001 Formatter Board Assembly. The formatter serves as the printer’s primary processing and communication board, managing print-job processing, firmware functions, USB communication, memory operations, and communication between the printer and the connected computer.

Confirmed Model Compatibility

• HP LaserJet P2015 Base Model
• HP LaserJet P2015d

Important Compatibility Notice

This formatter is designed specifically for the base P2015 and P2015d configurations. It is not designed for the internally networked models listed below:

• HP LaserJet P2015n
• HP LaserJet P2015dn
• HP LaserJet P2015x
• HP LaserJet P2014 or other P2000-series models

Please verify the printer’s complete model designation and compare the part number on the existing formatter before ordering. Similar-looking boards are not necessarily interchangeable.

Symptoms That May Indicate a Formatter Problem

• Printer is not consistently recognized through USB
• Print jobs remain in the queue or fail to process
• Printer repeatedly freezes during startup or operation
• Status lights remain in an abnormal or unresponsive pattern
• Configuration or firmware-related functions fail to operate correctly
• Known formatter failure confirmed through proper technical diagnosis

These symptoms may also be caused by the power supply, DC controller, cables, drivers, firmware, print engine, or another component. Replacing the formatter is not guaranteed to correct a printer that has not been properly diagnosed.

Product Specifications

What Is Included

One HP LaserJet formatter board assembly identified by part number Q7804-60001.

Printer, toner cartridge, USB cable, memory DIMM, exterior covers, mounting hardware, and unrelated components are not included unless specifically pictured or stated elsewhere in the listing.

Installation Recommendations

1. Turn the printer off and disconnect the power and USB cables.
2. Allow the printer to cool before beginning service.
3. Use proper electrostatic-discharge protection when handling the formatter.
4. Record the location and orientation of all cables before disconnecting them.
5. Transfer any required memory component only when applicable and compatible.
6. Reconnect every cable securely before reinstalling the formatter cover.
7. After installation, verify the printer configuration, driver settings, and duplex-unit setting when installed in a P2015d.

Frequently Asked Questions

Verify Before Ordering

Confirm that your printer is specifically labeled HP LaserJet P2015 or HP LaserJet P2015d and that the required formatter part number is Q7804-60001. Ordering by appearance alone may result in an incompatible purchase.